DYNASAFE HF50 DYNOMETRIC AXLE
- Custom made to replace the pin of either the upper block (most accurate) or idler sheave (least expensive)
- Protection: IP 65 (NEMA 4)
- No headroom loss
- Accuracy: ±0.5%
- Operating temperature from -4 to 176°F (-20 to 80°C)
- Must be used with HF 80 monitor
- Since the HF50 axles are made on a custom basis, each one is quoted individually.
HF50 Technical Sheet Price based on capacity and cable diameter
Please Email us with your specification
