SAFETY ENGINEERED HOIST RINGS
Each Actek Hoist Ring is 200% Proof-load Tested and individually serial numbered for better traceability.
Each hoist ring is individually packaged, shipped with a certificate of conformance, safety precaution, and additional safety information.
Swivel Hoist Rings are designed for lifting at any angle because they can swivel 360 degrees and pivot 180 degrees. Therefore, the rated load remains the same, regardless of the angle of force.
As a result, you increase safety and peace of mind.
Hoist rings are available with a rated load ranging from 800 lbs. to 250,000 lbs. with a 5:1 design safety factor.
- • Despite the 5:1 safety factor, NEVER EXCEED THE RATED LOAD CAPACITY. This safety margin is needed in case of misuse, which could drastically lower load capacity.
- • Tighten mounting screws to torque recommended. Periodically check torque because screws could loosen in extended service.
- • Tensile strength of parent material should be above 80,000 PSI to achieve full load rating. For weaker material, consider through-hole mounting with a nut and washer on the other side.
- • DO NOT APPLY SHOCK LOADS. Always lift gradually.
- Repeat magnaflux testing if shock loading ever occurs.
| Item # |
U-Bar (D) |
Rated Load |
Thread Sz. |
E |
B |
Torque |
| 41604 |
3/4 - Long |
6000 lbs |
7/8" - 9 |
1.53 in |
3.88 in |
160 ft/lb |
| 41606 |
3/4 - Long |
6500 lbs |
1" - 8 |
1.53 in |
3.75 in |
230 ft/lb |
| 41612 |
1 - Long |
11500 lbs |
1 1/4" - 7 |
2.29 in |
4.15 in |
470 ft/lb |
| 41614 |
1 - Long |
12000 lbs |
1 3/8" - 6 |
2.29 in |
7.03 in |
470 ft/lb |
| 41616 |
1 - Long |
12500 lbs |
1 1/2" - 6 |
2.29 in |
3.62 in |
800 ft/lb |
| 46000 |
3/4 |
2000 lbs |
7/16" - 14 |
0.78 in |
2.37 in |
22 ft/lb |
| 46002 |
3/4 |
4000 lbs |
5/8" - 11 |
0.78 in |
2.18 in |
60 ft/lb |
| 46004 |
3/4 |
4000 lbs |
5/8" - 11 |
1.03 in |
2.18 in |
60 ft/lb |
| 46005 |
3/4 |
4000 lbs |
5/8" - 11 |
1.53 in |
2.18 in |
60 ft/lb |
| 46006 |
3/4 |
4000 lbs |
5/8" - 11 |
1.28 in |
2.18 in |
60 ft/lb |
| 46007 |
3/4 |
2500 lbs |
9/16" - 12 |
0.78 in |
2.25 in |
30 ft/lb |
| 46008 |
3/4 |
2500 lbs |
1/2" - 13 |
0.78 in |
2.31 in |
28 ft/lb |
| 46010 |
3/4 |
2500 lbs |
1/2" - 13 |
1.03 in |
2.31 in |
28 ft/lb |
| 46012 |
3/4 |
2500 lbs |
1/2" - 13 |
1.28 in |
2.31 in |
28 ft/lb |
| 46014 |
3/4 |
5000 lbs |
3/4" - 10 |
1.03 in |
2.06 in |
100 ft/lb |
| 46018 |
3/4 |
5000 lbs |
3/4" - 10 |
1.53 in |
2.06 in |
100 ft/lb |
| 46100 |
3/8 |
600 lbs |
1/4" - 20 |
0.54 in |
1.27 in |
6 ft/lb |
| 46102 |
3/8 |
800 lbs |
5/16" - 18 |
0.29 in |
1.27 in |
7 ft/lb |
| 46104 |
3/8 |
800 lbs |
5/16" - 18 |
0.54 in |
1.27 in |
7 ft/lb |
| 46106 |
3/8 |
1000 lbs |
3/8" - 16 |
0.54 in |
1.27 in |
12 ft/lb |
| 46202 |
1 |
8000 lbs |
7/8" - 9 |
1.04 in |
2.93 in |
160 ft/lb |
| 46203 |
1 |
8000 lbs |
7/8" - 9 |
1.29 in |
2.93 in |
160 ft/lb |
| 46204 |
1 |
7000 lbs |
3/4" - 10 |
1.04 in |
3.06 in |
100 ft/lb |
| 46205 |
1 |
8000 lbs |
7/8" - 9 |
1.54 in |
2.93 in |
160 ft/lb |
| 46206 |
1 |
7000 lbs |
3/4" - 10 |
1.54 in |
3.06 in |
100 ft/lb |
| 46210 |
1 |
10000 lbs |
1" - 8 |
1.29 in |
2.81 in |
230 ft/lb |
| 46212 |
1 |
10000 lbs |
1" - 8 |
1.54 in |
2.81 in |
230 ft/lb |
| 46214 |
1 |
10000 lbs |
1" - 8 |
2.29 in |
2.81 in |
230 ft/lb |
| 46216 |
1 |
10000 lbs |
1 1/8" - 7 |
2.29 in |
2.69 in |
230 ft/lb |
| 46217 |
1 |
10000 lbs |
1 1/8" - 8 |
2.29 in |
2.69 in |
230 ft/lb |
| 46332 |
2 3/4 |
80000 lbs |
3 1/2" - 4 |
5.00 in |
7.98 in |
5100 ft/lb |
| 46334 |
2 3/4 |
80000 lbs |
3 1/2" - 8 |
5.00 in |
7.98 in |
5100 ft/lb |
| 46351 |
3/8 |
1250 lbs |
7/16" - 14 |
0.79 in |
1.20 in |
22 ft/lb |
| 46352 |
3/8 |
1500 lbs |
1/2" - 13 |
0.79 in |
1.15 in |
28 ft/lb |
| 46353 |
3/4 |
6000 lbs |
7/8" - 9 |
1.53 in |
1.94 in |
160 ft/lb |
| 46354 |
3/4 |
6500 lb |
1" - 8 |
1.53 in |
1.71 in |
230 ft/lb |
| 46355 |
1 |
11500 lbs |
1 1/4" - 7 |
2.29 in |
2.44 in |
470 ft/lb |
| 46356 |
1 |
12000 lbs |
1 3/8" - 6 |
2.29 in |
2.31 in |
470 ft/lb |
| 46357 |
1 |
12500 lbs |
1 1/2" - 6 |
2.29 in |
2.19 in |
800 ft/lb |
| 46359 |
1 1/4 |
16500 lbs |
1 1/2" - 6 |
2.89 in |
4.12 in |
800 ft/lb |
| 46360 |
1 1/4 |
17000 lbs |
1 5/8" - 5 1/2 |
2.89 in |
4.12 in |
800 ft/lb |
| 46361 |
1 1/4 |
17500 lbs |
1 3/4" - 5 |
2.89 in |
4.06 in |
800 ft/lb |
| 46362 |
1 1/4 |
18000 lbs |
1 7/8" - 5 |
2.89 in |
4.06 in |
800 ft/lb |
| 46363 |
1 1/4 |
18500 lbs |
2" - 4 1/2 |
2.89 in |
5.50 in |
800 ft/lb |
| 46364 |
1 3/4 |
32500 lbs |
2 1/4" - 4 1/2 |
3.20 in |
6.41 in |
800 ft/lb |
| 46365 |
1 3/4 |
35000 lbs |
2 1/2" - 4 |
3.75 in |
6.41 in |
2100 ft/lb |
| 46366 |
2 1/4 |
55000 lbs |
2 3/4" - 4 |
4.00 in |
6.16 in |
2100 ft/lb |
| 46367 |
2 1/4 |
60000 lbs |
3" - 4 |
5.00 in |
6.16 in |
4300 ft/lb |
| 46400 |
1 3/4 |
30000 lbs |
2" - 4 1/2 |
3.2 in |
5.91 in |
800 ft/lb |
| 46404 |
1 3/4 |
24000 lbs |
1 1/2" - 6 |
2.7 in |
6.41 in |
800 ft/lb |
| 46405 |
1 3/4 |
24000 lbs |
1 1/2" - 8 |
2.7 in |
6.41 in |
800 ft/lb |
| 46406 |
1 3/4 |
24000 lbs |
1 3/4" - 8 |
3.2 in |
6.16 in |
800 ft/lb |
| 46408 |
1 3/4 |
24000 lbs |
1 3/4" - 5 |
3.2 in |
6.16 in |
800 ft/lb |
| 46431 |
1 3/4 |
30000 lbs |
2 1/4" - 4 1/2 |
3.2 in |
5.66 in |
800 ft/lb |
| 46435 |
1 3/4 |
30000 lbs |
2 1/4" - 8 |
3.2 in |
5.66 in |
800 ft/lb |
| 46440 |
1 3/4 |
30000 lbs |
2" - 8 |
3.2 in |
5.91 in |
800 ft/lb |
| 46602 |
3/4 |
2500 lbs |
1/2" - 13 |
1.07 in |
1.84 in |
28 ft/lb |
| 46606 |
3/4 |
2000 lbs |
7/16" - 14 |
1.07 in |
1.9 in |
22 ft/lb |
| 46638 |
3/4 - Long |
2000 lbs |
7/16" - 14 |
0.78 in |
4.34 in |
22 ft/lb |
| 46640 |
3/4 - Long |
4000 lbs |
5/8" - 11 |
1.03 in |
4.12 in |
60 ft/lb |
| 46641 |
3/4 - Long |
4000 lbs |
5/8" - 11 |
0.78 in |
4.12 in |
60 ft/lb |
| 46642 |
3/4 - Long |
4000 lbs |
5/8" - 11 |
1.28 in |
4.12 in |
60 ft/lb |
| 46643 |
3/4 - Long |
4000 lbs |
5/8" - 11 |
1.53 in |
4.12 in |
60 ft/lb |
| 46644 |
3/4 - Long |
2500 lbs |
1/2" - 13 |
0.78 in |
4.25 in |
28 ft/lb |
| 46646 |
3/4 - Long |
2500 lbs |
1/2" - 13 |
1.03 in |
4.25 in |
28 ft/lb |
| 46648 |
3/4 - Long |
2500 lbs |
1/2" - 13 |
1.28 in |
4.25 in |
28 ft/lb |
| 46650 |
3/4 - Long |
5000 lbs |
3/4" - 10 |
1.03 in |
4 in |
100 ft/lb |
| 46651 |
3/4 - Long |
2500 lbs |
9/16" - 12 |
0.78 in |
4.19 in |
30 ft/lb |
| 46654 |
3/4 - Long |
5000 lbs |
3/4" - 10 |
1.53 in |
4 in |
100 ft/lb |
| 46655 |
1 - Long |
8000 lbs |
7/8" - 9 |
1.54 in |
4.52 in |
160 ft/lb |
| 46656 |
1 - Long |
8000 lbs |
7/8" - 9 |
1.04 in |
4.52 in |
160 ft/lb |
| 46657 |
1 - Long |
8000 lbs |
7/8" - 9 |
1.29 in |
4.52 in |
160 ft/lb |
| 46658 |
3/4 - Long |
7000 lbs |
3/4" - 10 |
1.04 in |
4.65 in |
100 ft/lb |
| 46660 |
1 - Long |
7000 lbs |
3/4" - 10 |
1.54 in |
4.65 in |
100 ft/lb |
| 46662 |
1 - Long |
10000 lbs |
1" - 8 |
1.29 in |
4.4 in |
230 ft/lb |
| 46664 |
1 - Long |
10000 lbs |
1" - 8 |
1.54 in |
4.4 in |
230 ft/lb |
| 46666 |
1 - Long |
10000 lbs |
1" - 8 |
2.29 in |
4.4 in |
230 ft/lb |
| 46668 |
1 - Long |
10000 lbs |
1 1/8" - 7 |
2.29 in |
4.28 in |
230 ft/lb |
| 46669 |
1 - Long |
10000 lbs |
1 1/8" - 8 |
2.29 in |
4.28 in |
230 ft/lb |
| 46702 |
1 1/2 |
20000 lbs |
1 3/8" - 6 |
2.5 in |
5.5 in |
540 ft/lb |
| 46802 |
1 1/4 |
15000 lbs |
1 1/4" - 7 |
1.89 in |
4.12 in |
470 ft/lb |
| 46805 |
1 1/4 |
15000 lbs |
1 1/4" - 8 |
1.89 in |
4.12 in |
470 ft/lb |
| 46806 |
1 1/4 |
15000 lbs |
1 3/8" - 6 |
1.89 in |
4.06 in |
470 ft/lb |
| 46807 |
1 1/4 |
15000 lbs |
1 3/8" - 8 |
1.89 in |
4.06 in |
470 ft/lb |
| 47002 |
2 1/4 |
50000 lbs |
2 1/2" - 8 |
4 in |
8.03 in |
2100 ft/lb |
| 47006 |
2 1/4 |
50000 lbs |
2 1/2" - 4 |
4 in |
8.03 in |
2100 ft/lb |
| 47008 |
2 1/4 |
50000 lbs |
2 3/4" - 4 |
4 in |
7.75 in |
2100 ft/lb |
| 47010 |
2 1/4 |
50000 lbs |
2 3/4" - 8 |
4 in |
7.75 in |
2100 ft/lb |
| 47200 |
2 3/4 |
75000 lbs |
3" - 4 |
5 in |
8.48 in |
4300 ft/lb |
| 47202 |
2 3/4 |
75000 lbs |
3" - 8 |
5 in |
8.48 in |
4300 ft/lb |
| 47402 |
3 1/4 |
100000 lbs |
3 1/2" - 4 |
7 in |
9.28 in |
5100 ft/lb |
| 47406 |
3 1/4 |
100000 lbs |
3 1/2" - 8 |
7 in |
9.28 in |
5100 ft/lb |
| 47602 |
5 |
250000 lbs |
6" - 4 |
9 in |
14 in |
9900 ft/lb |
Each Actek Hoist Ring is 200% Proof-load Tested and individually serial numbered for better traceability.
Each hoist ring is individually packaged, shipped with a certificate of conformance, safety precaution, and additional safety information.
Swivel Hoist Rings are designed for lifting at any angle because they can swivel 360 degrees and pivot 180 degrees. Therefore, the rated load remains the same, regardless of the angle of force.
As a result, you increase safety and peace of mind.
Hoist rings are available with a rated load ranging from 800 lbs. to 250,000 lbs. with a 5:1 design safety factor.
• Despite the 5:1 safety factor, NEVER EXCEED THE RATED LOAD CAPACITY.This safety margin is needed in case of misuse, which could drastically lower load capacity.
• Tighten mounting screws to torque recommended. Periodically check torque because screws could loosen in extended service.
• Tensile strength of parent material should be above 80,000 PSI to achieve full load rating. For weaker material, consider through-hole mounting with a nut and washer on the other side.
• DO NOT APPLY SHOCK LOADS. Always lift gradually.
Repeat magnaflux testing if shock loading ever occurs.
