Oilpatch Hoist

With the arrival of the Tractel’s Oilpatch Hoist, workers who had previously relied upon others to operate the hoist can now safely control their own ascent and descent with a radio control system.

The Oilpatch XE301P hoist comes in 110 or 220V with a rated load of 300kg (up to 2000kg available), operating at 35fpm. The ambient operating temperature of this hoist is -40 to 70°C. For colder climates low temperature synthetic oil is optional. This hoist has three separate brakes: a primary electromagnetic brake, a secondary brake to protect against run-offs, and a controlled descent brake for emergency lowering if loss of power occurs.

Oilpatch model XE301P

1. Rated load 700 lbs. single parted
2. Speed 35 ft./min. constant speed
3. Power 110V, 12A, 0.55 kW
4. Control FCC radio control 458 MHz
5. Unique address, 3 x 1.5 AA batteries
6. Operating temperature -40 to 70 Celsius
7. Operating range 100 m internal antenna
8. Gearbox- low temp synthetic oil lubrication
9. Strength factor > 4 to 1 on hoist
10. Size compact 980 x 375 x 485 mm
11. Motor TEFC 100% duty
12. Reeler capacity 100 m x 5/16” (8mm)
13. Emergency stop button
14. LED power on indicator light
15. 3 Brakes:
16. Secondary brake protects against wire rope run off
    
17. Controlled descent brake for emergency lowering without power
    
18. Primary electromagnetic brake
19. Reeler slack wire sensor switch
20. Rotation resistant 8 mm wire rope with swivel
21. Upper limit switch prevents two-blocking

OILPATCH TECH SHEET