Web www.torqhoist.com

Product Details :

Title: Wire Rope Slings

Description:

Wire Rope Slings are available in any length.
Standard Rope Diameters from 1/4" to 1-1/2"
Consult chart for sling specifications.

Rope Diameter in Inches Eye Size in Inches Vertical Capacity in Tons Choker Capacity in Tons Vertical Basket Capacity in Tons
1/4" 2X4 0.65 0.48 1.3
3/8" 4X8 1.4 1.1 2.9
1/2" 4X8 2.5 1.9 5.1
5/8" 5X10 3.9 2.9 7.8
3/4" 6X12 5.6 4.1 11
7/8" 7X14 7.6 5.6 15
1" 8X16 9.8 7.2 20
1-1/8" 9X18 12 9.1 24
1-1/4" 10X20 15 11 30
1-3/8" 11X22 18 13 36
1-1/2" 12X24 21 16 42

Features of Tough-Lock Type 10 Wire Rope Slings.

  1. Safety splcing technique provides 100% efficiency in achieving working loads
  2. Extra-improved plow steel 6 X 26 construction for increased flexibility & abrasion
  3. Independent wire rope core eliminates crushing & offers greater design load ratings
  4. Permanent engraved metal ID tags shows ratings, diameter, length, part number, serial number and warnings.
  5. All slings adhere and comply with current specifications of OSHA, AMSE B30.9c-2000 Wire Rope Technical, and Associated Wire Rope Fabricators.

Advise Wire Size and Length for a Quote

We can also provide the following style wire rope slings.

Type 12 (2-Leg Sling)

Type 13 (3-Leg Sling)

Type 14 (4-Leg Sling)

�

SINGLE BODY SLING STYLES


Type 1- Eye & Eye

Type 8- Thimble & Thimble

�

Sliding Chokers


�
Type 14
Eye & Thimble
With Sliding Choker Hook


Type 15
Eye & Eye
With: Sliding Choker Hook Latches not furnished on
Sliding Choker Hooks, unless requested.


Type 2- Eye & Hook

Type 9- Thimble & Hook

Type 3- Eye & Thimble

Type 10- Thimble & Slip-Thru Thimble

Type 4- Eye & Slip-Thru Thimble

Type 11- Thimble & Crescent Thimble

Type 5- Eye & Crescent Thimble

Type 12- Slip-Thru Thimble & Hook

Type 6- Crescent Thimble & Hook

Type 13- Slip-Thru Thimble - Both Ends

Type 7- Crescent Thimbles Both Ends
Please Note: Heavy duty, galvanized thimbles are
standard. Eye Hooks will be supplied with latches.

�

Flemish eye, mechanically swaged, single body wire rope slings feature 6 x 19 or 6 x 37 Construction, Extra Improved Plow Steel (EIPS), with an Independent Wire Rope Core (IWRC) for good abrasion resistance and a reasonable service life. Mechanically swaged, single body wire rope slings provide additional security, superior to return loop slings, should the swage sleeve become damaged during use. Thimbles greatly improve sling longevity, by protecting the rope at the connection points.

Stainless Steel Slings, slings with fiber cores (with reduced work load limits), Cable Laid Slings with a galvanized finish, and larger diameter slings are also available.

You must specify the sling type, diameter and length.

USE, CARE, MAINTENANCE AND REPAIR

Identification Requirements:

ASME B30.9-2006, Section 9-2.7.1
Each sling shall be marked to show:
a) name or trademark of manufacture
b) rated load(s) for the types of hitches and the angle upon which it is based
c) diameter or size
Sling identification should be maintained during the life of the sling by the sling user.

Prior to initial use all new swaged, socket, poured socket, turned back eye, mechanical joint grommets, and endless wire rope slings shall be proof tested by the manufacturer or qualified person. All wire rope slings incorporating used or repaired fittings and all repaired slings shall be proof tested by the manufacturer or qualified person.

Store slings in a dry, clean area away from chemicals, dust, grit, elevated temperatures or conditions that cause ropes to kink.

» Send request for this product :

Your Name: :
Your E-mail Address: :
Product you are interested in: :
DETAILS-Be Specific(Capacity, Lift, Speed, Voltage,Suspension, etc.) :
Captcha